Special Budget Series of External Halyard Flagpoles 15' - 35'

Other products in the category - Commercial Flagpoles:

Fiberglass External Halyard Series 15' - 78' -- Fiberglass External Halyard Series 15' - 78' Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America. STANDARD ACCESSORIES • Gold anodized aluminum ball ornament • Stationary truck on poles 15’ thru 39’, revolving truck on poles 50’ thru 78’ • Solid braided polypropylene halyard • Swivel flag snaps with vinyl covers on all models except FGR15, FGR20 & FGR25 which are supplied with nylon snaps • A cast aluminum cleat with mounting screws is supplied on all models except the FGR15 which is supplied with a cast nylon cleat • A fiberglass flash collar is supplied on all models except the FGR15, FGR20 & FGR25; a flash collar is available for the poles as an option • Fiberglass foundation sleeve Fiberglass has many features. Fiberglass laminate tensile strength exceeds 40,000 psi. Provides long lasting beauty because the hard, glossy polyester surface resists . . .

Atlas Series of External Halyard Flagpoles 20' - 60' -- Atlas Series Flagpoles 20' - 60' These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.

Contractor Series of External Halyard Flagpoles 20' - 70' -- Contractor (Economy Extra) Series Flagpoles 20' - 70' These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country for contractors bidding purposes. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.

Architectural Series of External Halyard Flagpoles 20' - 80' -- Architectural Series Flagpoles 20' - 80' These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.

Vanguard Series of Internal Halyard Flagpoles 20' - 40' -- Vanguard Series Flagpoles The Vanguard series of flagpoles combine the security of a concealed halyard system with the simplicity of a rope halyard. While lacking the the convience and sophistication of a winch operated system, the Vanguard provides an intelligent, economical alternative to the deluxe concealed halyard systems. The Vanguard's wire center halyard runs through a stationary truck and is secured in a cam-actioncleat located inside the flagpole behind a lockable access door. All fittings for a complete installation are included: gols anodized aluminum ball ornament, swivel flag snaps with vinyl covers, retaining ring, counterweight, a stainless steel quick link to make all necessary connections, spun aluminum flash collar and galvanized steel foundation sleeve. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.

Deluxe IH Series of Internal Halyard Flagpoles 20' - 80' -- Deluxe IH Series Flagpoles 20' - 80' These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self locking at any point, eliminating the need for a seperate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed. Due to the length and weight of flagpoles, shipping . . .

StoreFront | - U.S. Flags | - Residential Flagpoles | State and U.S. Territory Flags | - Commercial Flagpoles | - Historical Flags | - Indoor Flagpoles | - Nautical Flagpoles | Military & Civilian Service Flags | - Accessories & Parts | - Religious Flags & Sets | - Flags of the World | - Nautical Flags | - Banners & Streamers | - Corporate Flags | - Custom Flags | - Decorative Flags (Garden Flags) | - Home & Garden Items | - Specials





American Flags Flagpoles State Flags country flags Historic Flags
American Flagpoles and Flags ecommerce software powered by Nexternal