American Flagpoles and Flags

- Accessories & Parts / Flagpole Trucks (Top Assemblies)

This is where you will find a wide selection of trucks for the flagpoles. These are for both internal and external halyard poles. Trucks for those of you not familiar with the term is the assembly at the top of the pole that contains the pulley and receptacle for top ornament such as a gold ball.

OT Series Trucks -- $18.00 -- Cast aluminum construction with pulley (1 7/16" outside diameter on OTH, OT1 and OT25; 2" outside diameter on OT2, OT3, OT325 and OT35) on a 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one 1/4"-20NC on the OTH, three 5/16"-18NC on the OT1, OT2, OT25, OT3, OT325 and OT35). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 5/16".
Buy Now

RTC-1 Series Trucks -- $65.00 -- Cast aluminum construction with a 2" outside diameter nylon pulley on a 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by three stainless steel set screws (1/4"-20NC on the RTC-1-2 and RTC-1-138 and 5/16"-18NC on the RTC-1-238). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-20NC stainless steel pan head screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".
Buy Now

RTC-2 Series Trucks -- $65.00 -- Cast aluminum construction with two 2" outside diameter nylon pulleys on a 1/4" stainless steel axles. Designed to slip over the top of the flagpole and be secured by three stainless steel set screws (1/4"-20NC on the RTC-1-2 and RTC-1-138 and 5/16"-18NC on the RTC-1-238). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-20NC stainless steel pan head screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".
Buy Now

RTS-1 Series Trucks -- $54.00 -- Cast aluminum construction with a 2" outside diameter nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-203NC stainless steel pan head set screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".
Buy Now

ST-1 Series Trucks -- $20.00 -- Cast aluminum construction with a 1" outside diameter nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel set screw. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 1/4".
Buy Now

ST-32 Series Trucks -- $40.00 -- Cast aluminum construction with a 1 7/16" outside diameter cast pulley on a 3/16" stainless steel axles. Designed to slip over the top of the flagpole and be secured by three 5/16"-18NC stainless steel set screws. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4-20NC stainless steel set screw. Maximum halyard diameter is 5/16".
Buy Now

StoreFront | - Home & Garden Items | - U.S. Flags | - Accessories & Parts | - Residential Flagpoles | State and U.S. Territory Flags | - Commercial Flagpoles | - Historical Flags | - Indoor Flagpoles | - Nautical Flagpoles | - Attention Flags | Military & Civilian Service Flags | - Religious Flags & Sets | - Flags of the World | - Nautical Flags | - Banners & Streamers | - Corporate Flags | - Custom Flags | - Decorative Flags (Garden Flags) | - Specials





American Flags Flagpoles State Flags country flags Historic Flags
American Flagpoles and Flags ecommerce software powered by Nexternal